Ready To Cut CNC Art

LAPD Badge

10-7Mo

registered
Hi there,
Anybody happen to have the LAPD badge in .dxf? I'm using vcarve pro and looking to route this onto a wooden flag. The size of the badge would be about 10" in height. Any help would be appreciated.
4ebdd7fd841c760865432fc078a8bbd0 (1).jpg
 
this is a hard one to carve. ended up using a 30 degree v bit set to a max depth of .07. Make sure you set you feed rate slower than normal with all these fine lines or you will get tear out
 

Attachments

You must be signed in to view attachments...
  • LA_POLICE.svg
    143.9 KB
Back
Top Bottom